Shenzhen Lepower Opto Electronic Co.,Ltd
-12 years High Power LED Lighting Solution Supplier-
|Place of Origin:||Shenzhen|
|Certification:||CE RHOS UL TUV CB SAA|
|Minimum Order Quantity:||50pcs|
|Packaging Details:||Neutral carton packing|
|Delivery Time:||5-10 days|
|Payment Terms:||T/T,Paypal, Western Union|
|Supply Ability:||5000pcs per month|
|Driver:||5 Years||Luminous Efficiency:||150-160lm/w|
|Lumens:||30000lm||Application:||Highway,Industry Sites, Square Area,Park Etc|
led street light fixtures,
commercial street lighting fixtures
200w High Lumen Street Light Led 160lm/w Public Lighting Lamp ,
Save Energy 70%
High lumen output
The original lumen of LED is 200lm/w,the lumen output of complete lamp is 150-160lm/w,It can save more energy (60%-70%) than normal led lamps and traditional lamps.
Good heat dissipation
Adoption of fin structure which is thick top and thin buttom,use of air convection“Pull Down”effect, quickly dissipate thermal.thin junction between the heat sink and fins,quickly conduct heat,temperature rise less than 10 ℃
High Transmittance Rate of Lens
Adoption of Lepower developed “adapable collid tech” to achieve “zero air” space between LED and Lens, make up the loss of light reflected through different media,almost zero light loss.
Adoption the led light source of multi-chip encapsulation,chips first connection parallel then in serial, that means each chip can work independently.Whether open or short circuit failure will not affect the voltage and current distribution for other led,thus ensuring the light source work normally,greatly enhanced the module reliability.
|200W led street light|
|Mechanical Specifications||Beam Angle||IP Rating||PF||Lifetime||Rod
|150*70||IP66||>0.95||>50000hours||Φ60mm||5 years||-40~50 ℃|
1. Open the back board and back cover;
2. Connect the light wires and grid wires;
3. Insert the lamp pole into the light, lamp pole dia φ60mm;
4. Make sure the light is steady, lock the push board M10 Hexagon socket head cap screws, fix the light tightly onto the pole arm;
5. Close the back board, then back cover. Done;
6. Connect light power supply wire and grid wire according to above picture, blue to N, brown to L, yellow&green to E;
How Can I Get it (RFQ)
Q1. Can I have a sample order for led light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
A:Sample needs 3-5 days, mass production time needs 1-2 weeks ,It’s according to the order.
A: Low MOQ, 1pcs for sample checking is available.
A: We usually ship Sample by DHL,FedEx and TNT . It usually takes 3-5 days to arrive. mass products are shipping by sea or airport.
A: Firstly ,let us know your requirements or application.
Secondly,We quote according to your requirements or our suggestions. Thirdly ,customer confirms the samples and places deposit for formal order.
Fourthly, We arrange the production.
Contact Person: LEPOWER